ETC Cobalt Family v7.1.0 - Manual (Page 706)

Cobalt 7.1 - 20140612
705
Step around with arrow keys, press MODIFY to get a dropdown, or enter a number and press
MODIFY.
NOTE
When you press MODIFY or enter a number it will be an absolute value or a
Palette value - depending on the setting in Attribute Settings. See
Play
Settings - Attribute .
Content Effect Parameters
Besides the necessary channel source (Group or Channel Set) and Series, a number of parameters
are combined to define the result of a Content effect. You can adjust all of them live by selecting the
Effect Playback.
The Parameters are divided into two main groups:
• Content & Play Mode
• Timing
CONTENT & PLAY MODE PARAMETERS
Channel Source
The Channel Source that the effect is applied to can be a Set or a Group. See
Channel Sets and
Groups .
• The advantage with a Set is that you can define any type of custom channel distribution over
the parts, and they will always replay in the same way.