ETC Cobalt Family v7.1.0 - Manual (Page 903)

Cobalt 7.1 - 20140612
902
When DATA is active absolute data is shown, for example Pan 50%.
When DATA is off, referenced data is shown, for example F1 (focus palette 1)
• [DATA] - Toggle Data on/off..
Keyboard equivalent: none
Console Key - DELAY
The DELAY key is used to set delay times to the sequence step in the A or B field of the Main
Playback (depending on the Time Settings).
• [DELAY] & [IN] - Set a Delay In time.
• [#] [DELAY] & [OUT] - Set a Delay out time.
• [#] [CHANNEL] & [DELAY] - Set a channel delay time to the selected channel(s).
• [#] [DELAY] & [FOCUS] - Set an attribute delay time for the selected channel(s).
• [#] [DELAY] & [COLOR] - Set an attribute delay time for the selected channel(s).
• [#] [DELAY] & [BEAM] - Set an attribute delay time for the selected channel(s).
For more information see Sequences - Times , Sequence Times - Set To A or B .
Keyboard equivalent: [CTRL] & [D]
Console Key - DELETE
The DELETE key is used to delete data permanently in lists.
• [DELETE] - Delete the selected object in any list.
For more information see Editing In Lists .
Keyboard equivalent: [DEL]
Console key - DEVICE
The DEVICE key is used to activate Device Mode, and to open the Device List, where you can edit
the settings for all moving devices.
• [DEVICE] - Activate Device Mode for the pots.
• [SETUP] & [DEVICE] - Open the Device Mode settings.
• [MODIFY] & [DEVICE] - Open the Device List settings.
For more information see Device Control - Device Mode , Patch - Device List .
Keyboard equivalent: [D]