ETC Cobalt Family v7.1.0 - Manual (Page 614)

Cobalt 7.1 - 20140612
613
The changed device indication is cleared when you fade or step in the Sequence.
See Channel Information - Detailed
For more information see Presets - Record
Active Mode & Mark
Active Mode (default) means that all devices with an intensity over 0% will be recorded with all
parameters.
To be able to record parameters when an intensity is at 0% there is a special intensity state called
"Mark" which is indicated with an "M" where the level is normally shown.
To set a Mark level, select the channels press MARK.
Active Mode & Attribute Tracking
This is a mode that is automatically set to ON when you select Active mode for recording attributes
(5.1).
Hold UPDATE & ATTRIB to update changed attribute values in multiple presets (useful in record if
Active mode) similar to Intensity tracking.