ETC Cobalt Family v7.1.0 - Manual (Page 902)

Cobalt 7.1 - 20140612
901
For more information see Presets - Compare Mode .
There is no keyboard equivalent.
Console key - CONNECT
The CONNECT key is used to connect a Master with a Sequence to the Master Playback controls of
the console frontpanel. A Playback tab will be opened for this master.
• [CONNECT] & [master key] - Connect.
Close the Playback view with ESC to disconnect.
For more information see Master Playback - Playback Keys .
There is no keyboard equivalent
Console Key - COPY/CUT
The COPY/CUT key is used to copy and cut information for pasting. Information that can be copied,
cut and pasted is Text, Sequence Steps (Sequence List), Groups (Group List), Presets (Preset List),
Device Templates (Device Template List) and Attributes in the Preset List.
• [COPY/CUT] - Copy the selected object.
• [COPY/CUT] [COPY/CUT] - Cut the selected object.
For more information see Copy, Cut & Paste .
Keyboard equivalent: [CTRL] & [C/Alt
Console Key - CURSOR
The CURSOR key is only available in the big Cobalt console to set the built in trackball to mouse
mode.
• [CURSOR] - Set the trackball to mouse mode. Trackball will be red.
For more information see Facepanel - Trackball .
There is no keyboard equivalent
Console Key - DATA
The DATA key is a soft key in the CHANNELS menu of the console main display. It is used to set
toggle how attribute data is displayed in the channel views and the console displays.