ETC Cobalt Family v7.1.0 - Manual (Page 318)

Cobalt 7.1 - 20140612
317
Patch - Dimmer Curve Editor
It is possible to create any kind of curve in the Dimmer Curve Editor.
Action Key Feedback
1. Open the Dimmer Curve
List Browser >Patching
>Dimmer Curve List The Dimmer Curve List is
opened.
2. Insert a New Curve [INSERT]
A new curve is inserted.
You can name it in the Text
cell.
3. Open the Dimmer Curve
Editor [MODIFY] Press MODIFY in the
Dimmer Curve cell to open
the editor.
Dimmer Curve Editor (example: On/Off Curve)
Action Key Feedback
4. Insert a position [INSERT]
A position is inserted. You
can set percent, Output and
if this step should use
interpolation to the next
step.
INTERPOLATION
When Interpolation is ON the values to this point will be calculated smoothly from the previous point.
When Interpolation is OFF the value will be jumped to at this level.
NOTE
If a curve does not have a 0% and 100% rows, it will default to
0% = 0 output and 100% = 100 output