ETC Cobalt Family v7.1.0 - Manual (Page 805)

Cobalt 7.1 - 20140612
804
Flash type
Mode Applies to Feedback
Add Ch, group, preset,
effect Intensities are piled (HTP) on top of
the output. Attributes are LTP.
Solo Ch, group, preset,
effect The content of this fader replaces
all other master faders and returns
other faders based on the
Momentary/Latching mode setting.
Flash mode
Mode Applies to Feedback
All Preset, effect, chase,
Sequence Flash executes intensity and
attributes
Intensity Ch, group, preset,
effect, chase, Sequence Flash executes intensities only
Attributes Preset, effect, palette Flash executes attributes only
Flash time and level
Mode Applies to Feedback
Flash: Use time Ch, group, preset,
effect, chase, Sequence Flash functions will use in-wait-out
times
Flash level Ch, group, preset,
effect, palette, chase,
Sequence Target level for flash functions
Disable Flash Keys
The top area of all screens will indicate that flash is disabled by showing the Flash disabled indicator
pictured below.
Hold C/ALT and press FLASH MODE. Repeat to toggle on/off.
The top of the monitor screens will indicate the Flash is Disabled like this