ETC Cobalt Family v7.1.0 - Manual (Page 606)

Cobalt 7.1 - 20140612
605
Preset Attribute Editor - Columns
These are the different Device parameters that are displayed for each with their current values. For
editing see
Device Views - Editing .
Function group Parameters Explanation
Channel & Level No input The number of the device is
highlighted when selected, and red
when focused with NEXT/LAST.
The level is indicated to the right.
Device Delete Device Press DELETE to delete this device
completely*
GoOnGo AutoMark, GoOnGo or
GoInB per Device Overrides the Sequence Step
GoOnGo setting for this particular
Device.
FOCUS
parameters Pan, Tilt, Focus Speed The parameters that exist for the
selected device are shown with their
values.
COLOR
parameters Cyan, Magenta,
Yellow, Color,
Color2, CTO, Color
speed etc... The parameters that exist for the
selected device are shown with their
values.
BEAM parameters Focus, Iris, Zoom,
Strobe, Gobo, Gobo
<>, Gobo rot, etc...
The parameters that exist for the
selected device are shown with their
values.
CONTROL
parameters Aux 1, Control,
Dummy ch's etc... The parameters that exist for the
selected device are shown with their
values.
*There is a popup to confirm deleting a device.