ETC Cobalt Family v7.1.0 - Manual (Page 483)

Cobalt 7.1 - 20140612
482
With groups loaded
Load channels
Action Key Feedback
Load selected
[PRESET] &
[Wheel_Key]
The selected channels are
loaded as a channel group
to the wheel.
Load selected [GROUP] &
[Wheel_Key] The selected channels are
loaded as a channel group
to the wheel.
Load group [#] [GROUP] &
[Wheel_Key] The channels of Group #
are loaded to the wheel.
Load selected [CHANNEL] &
[Wheel_Key] The selected channels are
loaded as a channel group
to the wheel.
Load channel... [#] [CHANNEL] &
[Wheel_Key] The channel # is loaded to
the wheel.
NOTE
The channels affected by a group wheel are updated when they are selected.
This means that if the level has changed (by a crossfade or a manual change
of some kind), the group wheel will now always catch up. The
overflow/underflow information will therefore be lost if you are taking
multiple channels over 100% or under 0%.
NOTE
In a client setup with multiple users each client will have individual settings
for group wheel mode.