ETC Cobalt Family v7.1.0 - Manual (Page 490)

Cobalt 7.1 - 20140612
489
Select - Sub-selection Functions
In all cases below - Press SELECT ALL to return to the original selection.
Function Soft Key Feedback
Every 2nd [Select_2nd] Every second channel from the
current channel selection is
selected. Use NEXT/LAST to step.
Every 3rd
[Select_3rd]
Every third channel from the
current channel selection is
selected. Use NEXT/LAST to step.
Every # th * [#] [Select_Nth] Every # th channel from the current
channel selection is selected. Use
NEXT/LAST to step.
Random 2nd [RANDOM] &
[Select_2nd] Two random selections are created
from the current selection. Use
NEXT/LAST to step.
Random 3rd
[RANDOM] &
[Select_3rd]
Three random selections are created
from the current selection. Use
NEXT/LAST to step.
Random Nth [RANDOM] &
[Select_Nth] Nth random selections are created
from the current selection. Use
NEXT/LAST to step**
*If no number is entered, the last used number will be used.
**The last used Random selection # is used.
Channels - Random Select
It is possible to randomize the order of the channels within the current selection. This can be used to
get a random order in a chase or with a Dynamic Effect.
Action Soft Key Feedback
1. Select the channels you
want to work with See Channel
Command Syntax
2. Select the Selects Soft
Key Page [SELECT] This changes soft
menu to the Select
functions
3. Make a random selection [RANDOM] The channels are
re-selected in a
random order.
You can use the numbering functions that allow you to select every 2nd, 3rd or Nth together with the
random function.