ETC Cobalt Family v7.1.0 - Manual (Page 659)

Cobalt 7.1 - 20140612
658
NOTE
Select format by pressing FORMAT.
Hold FORMAT and press Down Arrow to open up Time and Delay rows. See
Device Times - Attribute Time Editor
Live Attributes - Columns
These are the different Moving Device parameters that are displayed for each with their current
values. For editing see
Device Views - Editing
Function group Parameters Explanation
Channel & Level No input The number of the device is
highlighted when selected,
and red when focused with
NEXT/LAST. The level is
indicated to the right.
FOCUS
Pan, Tilt, Focus Speed
Current parameter values
are shown.
COLOR Cyan, Magenta, Yellow,
Color, Color2, CTO,
Color speed etc... Current parameter values
are shown.
BEAM Focus, Iris, Zoom,
Strobe, Gobo, Gobo <>,
Gobo rot, etc... Current parameter values
are shown.
CONTROL* Aux 1, Control, Dummy
ch's etc... Current parameter values
are shown.
*Control parameters labelled "control" can be edited, but will not be stored, Aux values are stored.
NOTE
Hold COLUMN and move wheel to change column sizes.