Brother PE-DESIGN V7 - Manual (Page 87)

81
Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)
Automatically converting an image to
an embroidery pattern (Auto Punch)
■
If Auto Punch is selected
→ After the image has been analyzed by the
software, an Image Analysis dialog box
similar to the one shown below appears.
1.
Select the desired settings.
To display the resulting analyzed image, click
the Result View tab. The embroidery pattern
will be created with this image.
To adjust the zoom ratio that the image is
displayed in, move the slider between
and .
To display the outline extracted from the
analyzed image, select the Show Outline
check box.
Use the following sliders to specify the
settings for analyzing the image.
Noise reduction: Sets the level of noise
(distortions) that is removed from the image.
Segmentation sensitivity: Sets the
sensitivity for the image analysis.
Max. Number of Colors: Sets the number of
colors used.
From the Thread Chart selector, select the
desired thread color chart. The most
appropriate thread colors from the selected
thread chart are selected. A user thread chart
can also be selected.
To display the original image, click the
Original View tab.
2.
On the Result View tab, click the areas of the
image to select whether or not they are to be
sewn.
3.
If necessary, in the Omit Colors list, click the
colors to select whether or not they will be
sewn.
4.
After selecting the desired settings, click
Finish.
→ An embroidery pattern is created from the
analyzed data, the appropriate thread
colors and sew type settings are applied,
and then the pattern is displayed in the
Design Page.
b
Memo:
• After changing the settings, click Retry to
display the image with the new settings
applied. If Retry is not clicked, the new
settings are not applied.
• To quit the operation and close the dialog
box, click Cancel.
• To return to the previous dialog box, click
Previous.
b
Memo:
Areas not set to be sewn are shown filled with
a crosshatch pattern.
b
Memo:
Colors that are crossed out are set to not be
sewn.
These areas
will not be sewn.