Brother PE-DESIGN V7 - Manual (Page 138)

132
Arranging Embroidery Designs (Layout & Editing)
5.
Change the font, size, color, sew type and
other attributes.
Specifying text attributes
Various character attributes for text can be set in the
Text Attribute Setting dialog box.
Toolbar button:
1.
Select the text that you want to edit.
2.
Click , or click Text, then Text Attribute
Setting.
→ The Text Attribute Setting dialog box
appears.
3.
If necessary, change the text attributes.
4.
Click Apply to apply the effect of the setting.
b
Memo:
• To select all characters between the
selected character and the next character
selected, hold down the
key while
clicking the next character.
• To select an additional character in the
direction of the last character, hold down
the
key and press the
→
or
↓
key.
To select an additional character in the
direction of the first character, hold down
the
key and press the
←
or
↑
key.
Holding down the key and pressing
the opposite arrow key deselects the
character.
• To deselect the current character and select
the following character in the direction of the
last character, hold down the key
and press the
→
or
↓
key. To deselect the
current character and select the following
character in the direction of the first
character, hold down the
key and
press the
←
or
↑
key.
b
Memo:
With TrueType fonts, the outline can be set to
be sewn or not, and settings can be selected
for the color and sew type.
Shift
Shift
Shift
Shift
Ctrl
Ctrl
b
Memo:
To return a parameter to its default setting,
click beside it.
b
Memo:
To close the dialog box, click Close.
Kerning
Sets the spacing
between individual
characters.
Range: -100 to 100 mm
(-3.94 to 3.94 inches)
Default: 0
0.0 mm
5.0 mm
(between “A”
and “b”)
Vertical
Offset
Moves the text vertically.
Range: -100 to 100 mm
(-3.94 to 3.94 inches)
Default: 0
0.0 mm
2.0 mm