Brother PE-DESIGN V7 - Manual (Page 317)

311
Tutorial (Advanced)
Step 2 [Case 3] Reshaping a single line to create
custom stitch patterns (Motif mode)
In Motif mode, you can create original stitch patterns
by changing the shape of a single line. These stitch
patterns can be applied in line sewing and region
sewing in Layout & Editing, and region sewing in
Design Center.
Switch to Motif mode.
Click Mode, then Motif.
Create the pattern.
Click .
Click the base line between the start point
(blue square) and end point (red square).
→ A block square appears.
Drag the point that you want to move to a new
position.
The line that moves turns pink when moving a
point.
1
2
b
Memo:
• To move the point horizontally or vertically,
hold down the key while dragging it.
• Pressing the arrow keys moves the
selected point one grid mark in the direction
of the arrow on the key. If the grid is not
displayed, the pattern moves a distance
smaller than the smallest grid interval in the
direction of the arrow on the key.
• To delete a selected point, press the
key.
Shift
Delete