Brother PE-DESIGN V7 - Manual (Page 265)

259
Creating Custom Stitch Patterns (Programmable Stitch Creator)
■
Motif mode
In Motif mode, you can create custom stitch patterns
by changing the shape of a single line. These stitch
patterns can be applied in line sewing and region
sewing in Layout & Editing, and region sewing in
Design Center.
A green arrow appears at the rignt center edge of
the work area, showing the direction that the pattern
(stitch) will be sewn.
A single pink line appears along with the green
arrow. This line indicates the base for the motif
stitch, which can be altered by inserting points with
the Edit Point tool, and then moving them to form
custom designs.
The blue square at the left edge of the work area
indicates the start point of that line and the red
square at the right edge indicates the end point of
the stitch.
The start and end points cannot be deleted, and
they must be aligned vertically. Therefore, if you
move one point up or down, the other point will
automatically move in the same direction.
b
Memo:
To display the Preview Window, click Display
on the menu bar, and then click Preview.
Example of a pattern
b
Memo:
To display Preview Window, click Display on
the menu bar, and then click Preview.
Example of a pattern
Line sewing
Region sewing