Brother PE-DESIGN V7 - Manual (Page 291)

285
Managing Embroidery Design Files (Design Database)
a
Note:
If a .pes file is saved with objects extending
off the Design Page or with the number of
stitches or number of colors for the objects
exceeding the Design Page limitations, the
designs cannot be saved on an original card.
Only the embroidery designs displayed in
the writing list will be written to the original
card.
b
Memo:
• To remove an embroidery design file from
the writing list, click , or right-click it,
and then click Remove from Writing List.
• Patterns created on a custom-sized Design
Page are written to cards split into their
various hoop sections.
If the total size of the pattern exceeds the
capacity of the original card or if your hoop
size is 90
×
90 cm (3.54"
×
3.54") and the
Design Page is split into over 80 sections,
the available space appears in yellow on
the progress bar. When is
clicked, the Select Hoop Sections dialog
box appears, allowing you to select the
pattern sections to be written in the
available space on the card.
The progress bar at the top of the dialog box
shows the available space on the card as you
select pattern sections to be written to the
card. The space used by the selected pattern
sections appears in blue. If, however, you
select a pattern section that exceeds the size
limit, the space used appears in yellow, and if
you select several pattern sections which
exceed the size limit, the space used appears
in red.
Click Select to add the selected pattern
sections to the writing list. To deselect a
pattern section, simply click it again. (The
Select button is available only when a section
is selected and the space on the card is
sufficient to receive the selected patterns.)