Brother PE-DESIGN V7 - Manual (Page 60)

54
Tutorial
→ The Sewing Attribute Setting dialog box
appears as shown below.
Click Apply.
→ The stitch and its settings are applied to
the inside area of the selected circle.
Click Close.
Use the Outline tool to draw the rays of
the sun.
Click , then .
→ The shape of the pointer changes to
,
and the Sewing Attributes bar appears as
shown below.
Select the color and sew type for the outline.
For this example, select the color RED, and
use the default sew type, Zigzag Stitch.
Select the color of the region. For this
example, select the color VERMILION, and
sew type of Fill Stitch.
a
Note:
The selected sewing attributes will be
applied to the regions of every pattern that
will be drawn, until the attributes are
changed.
a
Note:
Make sure that Close path is selected in the
Path shape selector. If Close path is
selected, the first point and the last point are
automatically joined to form a region. If
Open path is selected, the pattern will not
have a region, therefore sewing attributes
can only be applied to the line. To draw a
simple line, select Open path.
3
Path shape Line sewing Region sewing