Brother PE-DESIGN V7 - Manual (Page 230)

224
Manually Creating Embroidery Patterns From Images (Design Center)
Cross stitch
Concentric circle stitch, radial stitch and spiral stitch
For details on moving the center point of the concentric circle stitch and the radial stitch, refer to “Applying
effects to concentric circle and radial stitches” on page 227.
Random Walking Stitch
Size
Sets the horizontal and vertical size of the pattern.
In Expert mode, the set value is converted automatically and displayed in the box for the other
measurement units.
Range: 1.5 – 5.0 mm (0.06 – 0.20 inch) or 5 – 17 counts
Default: 2.5 mm (0.10 inch) or 10 counts
Times
Sets the number of times that the pattern will be sewn. Sews twice per time.
Range: Single, Double, Triple
Default: Single
Density
Sets the number of lines per millimeter.
Range: 0.2 – 7.0 lines per mm (5 – 178 lines per inch)
Default: 2.0 lines per mm (51 lines per inch)
Run pitch
Sets the pitch of the line sewing.
Range: 1.0 – 10.0 mm (0.04 – 0.39 inch)
Default: 2.0 mm (0.08 inch)
Run pitch
Sets the pitch of the line sewing.
Range: 1.0 – 10.0 mm (0.04 – 0.39 inch)
Default: 2.0 mm (0.08 inch)
Space
Sets the spacing between adjacent stitches.
Range: 2.0 – 50.0 (0.08 – 1.97 inches)
Default: 10.0 mm (0.39 inch)