Brother PE-DESIGN V7 - Manual (Page 180)

174
Arranging Embroidery Designs (Layout & Editing)
2.
Click in the upper-right corner of the
dialog box to close the dialog box.
Checking embroidery
design information
Sewing information such as dimensions, needle
count, color count and color order of patterns can be
checked in the Design Property dialog box.
1.
Click Option, then Design Property.
→ The Design Property dialog box
appears.
→ If the Design Page was set to Custom
Size and no object in the Design Page is
selected, the sewing information for the
entire Design Page is displayed hoop by
hoop, and a Design Property dialog box
similar to the one shown below appears.
b
Memo:
• The first number beside indicates the
number of the current stitch, and the second
number indicates the total number of
stitches.
• The first number beside indicates the
number of the color being drawn, and the
second number indicates the total number
of colors used.
• The first number beside indicates the
pattern section that is displayed, and the
second number indicates the total number
of hoop sections in the pattern. This
indicator appears only for patterns created
on custom-sized Design Pages.
b
Memo:
If a pattern was selected when the Stitch
Simulator dialog box was displayed, only the
selected pattern is drawn in the simulation.
b
Memo:
• You can select and check the properties of
individual objects within the embroidery
pattern by selecting the pattern before
opening this dialog box.
• To display the colors as the machine’s
preset color names, select the With Basic
Color check box.
• This dialog box can be resized. The size of
the dialog box is retained until it is changed
again.
• To close the dialog box, click Close.
a
Note:
If a pattern is larger than the Design Page or
if it is positioned so that it does not
completely fit within the Design Page, the
error message “Please change the object
size or position.” appears instead of this
dialog box. After the design causing the error
is displayed selected, change its size or
position. (If more than one design causes
the error message to appear, they will be
displayed in the sewing order.)