Brother PE-DESIGN V7 - Manual (Page 80)

74
Tutorial
Step 2 Saving the design
After the appliqué pattern is finished, you may
want to save it.
Click File, then Save.
Select the drive and the folder, and then type
in the file name.
Click Save.
Step 3 Transferring the design to an
original card
By writing a design to a media that can be used in
your embroidery machine and transferring it to
your embroidery machine, you can actually sew
the design. For this example, we will transfer the
design to an original card.
Insert an original card into the USB card
writer module.
Transfer the embroidery design.
Click File, then Write to Card.
→ The following message appears.
Click OK.
b
Memo:
For other media you may use include floppy
disks, compact flash memory, USB media and
etc.
a
Note:
The original card is inserted correctly when
you hear it snap into place.
a
Note:
Before using the original card, make sure
that the designs on the card are no longer
needed or make sure to store them on your
hard drive or other storage media.
1
2