Brother PE-DESIGN V7 - Manual (Page 159)

153
Arranging Embroidery Designs (Layout & Editing)
■
Line sewing attributes
The available attributes differ depending on the selected sew type.
Zigzag stitch
Running stitch
Triple stitch
Under sewing
Sets underlay stitching on or off. Use underlay stitching in order to prevent shrinking during
stitching.
On: Underlay stitching will be sewn.
Off: Underlay stitching will not be sewn.
Default: Off
Zigzag width
Sets the width of the zigzag.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Density
Sets the number of lines per millimeter (inch).
Range: 1.0–7.0 lines per mm (25–178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
Half Stitch
Sets half stitching on or off.
If one side of the zigzag stitching is dense, a half stitch could
be sewn automatically to provide a more even density.
Available for text and objects created with the drawing tools.
Default: Off
Sharp Corners
Sets how pointed corners are sewn.
Default:
On:
Off:
Run pitch
Sets the pitch of the line sewing.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Run times
Sets the number of times that the border will be sewn.
Range: 1–5
Default: 1
Run pitch
Sets the pitch of the line sewing.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)