Arranging embroidery designs (layout & editing) – Brother PE-DESIGN V7 User Manual
Page 166
160
Arranging Embroidery Designs (Layout & Editing)
Cross stitch
Concentric circle stitch, radial stitch and spiral stitch
For details on moving the center point of the concentric circle stitch and the radial stitch, refer to “Moving the
center point” on page 111.
Random Walking Stitch
Piping stitch
Stitches run parallel through the length of adjacent blocks.
Size
Sets the horizontal and vertical size of the pattern.
In Expert mode, the set value is converted automatically and displayed in the box for the other
measurement units.
Range: 1.5–5.0 mm (0.06–0.20 inch) or 5–17 counts
Default: 2.5 mm (0.10 inch) or 10 counts
Times
Sets the number of times that the pattern will be sewn. Sews twice per time.
Range: Single, Double, Triple
Default: Single
Density
Sets the number of lines per millimeter.
Range: 0.2–7.0 lines per mm (5–178 lines per inch)
Default: 2.0 lines per mm (51 lines per inch)
Run pitch
Sets the pitch of the line sewing.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Run pitch
Sets the pitch of the line sewing.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Space
Sets the spacing between adjacent stitches.
Range: 2.0–50.0 (0.08-1.97 inches)
Default: 10.0 mm (0.39 inch)
Direction
Specifies the sewing angle.
Available for stitching other than manual punching patterns.
The stitching will be made in the direction of the angle set.
Range: 0-359 degrees
Default: 0 degrees
Density
Sets the number of lines per millimeter.
Set when Use Motif is OFF.
Range: 0.1–5.0 lines per mm (3–127 lines per inch)
Default: 1.0 lines per mm (25 lines per inch)
Run pitch
Sets the pitch of the line sewing.
Set when Use Motif is OFF.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 4.0 mm (0.16 inch)
Frequency
Sets the spacial frequency steps.
Set when Use Motif is OFF.
Range: 0–99%
Default: 30%
Use Motif
Sets motif stitching on or off.
On: Motif stitching is sewn.
Off: Motif stitching is not sewn.
Default: Off
For details on this attribute, refer to “Motif stitch” on page 154. (However, Direction is not
available.)
0°
45°
90°
135°
180°
225°
270°
315°
0%
30%