Brother PE-DESIGN V7 - Manual (Page 290)

284
Managing Embroidery Design Files (Design Database)
Writing Embroidery Design Files to an
Original Card
Selected files can be written to original cards. The
embroidery patterns written to original cards can
then be transferred to an embroidery machine and
sewn.
1.
Insert an original card into the USB card writer
module.
Files other than .phc files can be written.
2.
Click .
→ The Card writing box appears.
3.
From the Hoop size selector, select the
appropriate size of embroidery hoop.
4.
Click , and then select the
folder where the desired design file (.pes) is
saved.
→ All embroidery files in the selected folder
are displayed in the contents pane.
5.
In the contents pane, select the embroidery
file that you want to write to the original card.
6.
Click , or right-click it, and then click
Add to Writing List.
→ The selected file is added to the writing
list.
a
Note:
• The original card is inserted correctly
when you hear it snap into place.
• The embroidery machine must be turned
off before original cards are inserted or
removed. However, it is not necessary to
turn off the computer when original cards
are inserted or removed from the USB
card writer module.
Contents pane Writing list
(Available patterns) (Selected patterns)
b
Memo:
• To hide the card writing box, click
b
Memo:
Do not select a hoop size larger than the
embroidery hoop that can be used with your
embroidery machine. Otherwise, the created
original card will not work correctly with the
embroidery machine.
b
Memo:
A file can also be added to the writing list by
selecting it in the contents pane, then
dragging it to the writing list.