Lenovo ThinkPad SL300 - Manual (Page 46)

Note: At this point, a message is displayed stating that the deployment phase is complete. The person
controlling the deployment can either shut down the computer at this point and ship it to another
location, or continue with the installation phase.
3. The person controlling the installation process, starts the installation phase by making selections from
the installation menus to define the image to be installed.
4. The modules required for the defined image are unpacked from the service partition onto the C partition.
5. The setup process begins. When the installation phase is over, the C partition contains the new image
and the service partition contains the Smart Image, which can be used for client-side recovery.
Note: An optional cleanup step can be defined in the base map Map Settings window to minimize the
size of the service partition and keep only those files required for the installed image, or eliminate
the service partition.
CD, DVD, USB key, or USB hard disk drive distribution
The following illustration shows the deployment process using Image Ultra Builder Distribution Media and a
local-installation process, which uses a service partition as a staging area.
Smart Image
on service
partition
Final image
on C partition
Create
distribution
CD
Start target
computer with
distribution CD
Smart image
on Staging area
(service partition)
C partition
Repository
Deployment Installation
S
e
t
u
p
Cop
y
5
6
4
3
2
1
Make menu
selections to
define the
image to be
installed
1. The first step in deployment is the creation of ImageUltra Builder Distribution Media. (See the ImageUltra
Builder help system for details).
2. The person controlling the media deployment starts the process by booting the target computer with
ImageUltra Builder Distribution Media.
3. The maps and modules contained on the media are copied to the service partition, which acts as
the staging area for the complete Smart Image.
Note: At this point, a message is displayed stating that the deployment phase is complete. The person
controlling the deployment can either shut down the computer at this point and ship it to another
location, or continue with the installation phase.
4. The person controlling the installation process, starts the installation phase by making selections from
the installation menus to define the image to be installed.
5. The modules required for the defined image are unpacked from the service partition onto the C partition.
6. The setup process begins. When the installation phase is over, the C partition contains the new image
and the service partition contains the Smart Image, which can be used for client-side recovery.
Note: An optional cleanup step can be defined in the base map Map Settings window to minimize the
size of the service partition and keep only those files required for the installed image, or eliminate
the service partition.
32 ImageUltra Builder Version 5.01 User Guide