Lenovo ThinkPad SL300 - Manual (Page 166)

2. Click the Options tab.
3. Use the Install slot drop-down menu to select the appropriate install slot number.
4. In the Main window toolbar, click the Save icon.
5. Close the module window.
Modifying the install sequence with a base map
You can modify the install sequence in a base map to accomplish either of the following:
• To fine tune the installation order for modules that get installed during the customer first boot and share
the same slot number
• To set the installation order for one or more partitioning modules and a base operating-system module
when both are being used in the same map.
In the Install Sequence window, use a drop-down menu to select a customer-first-boot module (by install
slot) or base operating-system modules; then, set the install sequence for all modules within that type.
The Set the Install Sequence fields are as follows:
• First: Place modules that need to be installed first in this field in a specified sequence.
• No Preference: Place modules that do not require sequencing in this field in any order.
• Last: Place modules that need to be installed last in this field in a specified sequence.
• Check the Insert Driver Map modules after this module check box to determine the install sequence of
when the driver map modules will be installed.
Note: You can only select this check box for Base Map Customer First Boot modules.
To modify the installation sequence within a base map, do the following:
1. In the Repository window, double-click the appropriate base-map entry. The Base Map window opens.
2. In the Main window menu bar, click Tools, and then click Install Sequence. The Install Sequence
window opens.
3. Select the type of modules for which you want to set the order. The modules for the selected type are
shown in the Set the install sequence boxes.
4. Click the module entry you want to move, and then use the Move Item Up or Move Item Down icon in
the Map Settings window to move the module entry to the First, Last, or No preference box.
5. Check the Insert Driver Map modules after this module check box to determine the install sequence of
when the driver map modules will be installed.
Note: You can only select this check box for Base Map Customer First Boot modules.
6. Repeat this step for each module you need to move.
7. After all modules have been moved to the appropriate box, use the Move Item Up or Move Item Down
icon in the Map Settings window to set the order within the First box and the Last box.
Notes: When working with partitioning modules, adhere to the following:
• By default, Primary NTFS Partition partitioning modules (Windows 2000 Primary Partition, Windows
XP Home Primary Partition, Windows XP Pro Primary Partition, Windows Vista (32 bit) Partition
Module, Windows Vista (64 bit) Partition Module, Windows 7 (32 bit) Partition Module, or Windows 7
(64 bit) Partition Module) are always installed before their associated I386 base operating-system
modules. In most cases, there is no reason to move Primary NTFS Partition partitioning modules.
• When working with I386 base operating-system modules, partitioning modules designed to create
or preserve extra partitions (such as Drive Prep - Delete C Partition only) must be installed before
Primary NTFS Partition partitioning modules (Windows 2000 Primary Partition, Windows XP Home
152 ImageUltra Builder Version 5.01 User Guide