Lenovo ThinkPad SL300 - Manual (Page 134)

10. Click OK.
11. Repeat steps 6 through 10 for each device-driver module you want to add.
12. When you are finished, click the Save icon in the Main window toolbar.
Replacing modules in a driver map
To replace one or more modules in a driver map, do the following:
1. Open the repository where the driver map resides.
2. If your repository contains folders, navigate to the folder where the driver map resides.
3. In the right pane of the Repository window, click the Driver Maps tab. A list of driver maps is displayed.
4. Double-click the appropriate driver map. The Driver Map window opens.
5. Expand the map tree.
6. In the Main window menu bar, click View. The View Modules window opens.
7. In the top view pane of the View Modules window, click the module you want to replace. If you want to
replaced more than one module at a time, use the Shift key or Ctrl key in conjunction with the mouse to
highlight multiple modules.
8. Check the check box for the referenced item.
9. Click the Replace module icon, located in the View Modules window toolbar.
10. Select a replacement module from the Replace Module dialog, and click OK. The modules are then
replaced in those menu items which were checked.
Note: When replacing filters or utilities, the command line parameters are copied from the original
filter or utility to the replacement filter or utility.
11. Repeat steps 6 through 10 for each device-driver module you want to replace.
12. When you are finished, click the Save icon in the Main window toolbar.
Working with driver-map settings and menu-item properties
Driver-map settings apply to the entire map. You use the driver-map settings to add comments about the
map, assign keywords to a map, or enable or disable the network-sync function. Menu-Item properties apply
to a specific menu item. You use menu-item properties to change the text of a menu item or to associate
one or more filters with a menu item. Unlike menu items in a base map, menu items in a driver map are
not displayed as part of the menu system. The only purpose of driver-map menu items is for annotation
and creating a structure to assign filters.
Specifying driver-map settings
The driver-map settings enables you to do the following:
• Add comments to a map
• Assign keywords to a map
• Enable or disable the network-sync function
To work with the driver map settings, do the following:
1. Open the repository where the driver map resides.
2. If your repository contains folders, navigate to the folder where the driver map resides.
3. In the right pane of the Repository window, click the Driver Maps tab. A list of driver maps is displayed.
4. Double-click the appropriate driver map. The Driver Map window opens.
5. In the Main window menu bar, click Tools and then click Settings.... The Map Settings window opens.
• In the General tab, you can do the following:
120 ImageUltra Builder Version 5.01 User Guide