Lenovo ThinkPad SL300 - Manual (Page 136)

Note: Typically, filters are associated with menu items only when the modules listed under the menu
item are tied to a certain machine condition. For example, if you are creating a driver-map tree structure
that contains device drivers for multiple machine types, you can use a filter to determine the machine
type of the target computer and install only those device-driver modules that apply to a specific machine
type. When a filter is associated with a menu item in a driver map, the filter is automatically run during
the installation process at the target computer.
a. In the Conditions tab, click the Insert Filter icon. The Add Filters window opens.
b. In the left pane of the Add Filters window, navigate to the folder that contains the filter you want to
associate with the menu item
c. In the right pane of the Add Filters window select the filter you want to associate with the menu item,
then click OK. The Add filters window closes and the filter is added to the Conditions tab.
d. Double-click the filter you just added. The Edit Parameters window opens.
e. In the Parameters field, type any parameters required for the filter. For information about the
parameters used with the filters provided as part of the ImageUltra Builder program, refer to the
ImageUltra Builder help system.
f. Repeat steps a through e for each filter you want to associate with the menu item.
g. If you have more than one filter associated with a menu item, do one of the following:
• If you want the menu item to be displayed only if the conditions set by all filters are met, place a
check mark in the All conditions must be satisfied check box.
• If you want the menu item displayed if the conditions set by at least one filter is met, do not place
a check mark in the All conditions must be satisfied check box.
9. When you have finished making the changes, click the Save icon located in the Main window toolbar;
then, close the Menu Item Properties window.
122 ImageUltra Builder Version 5.01 User Guide