Allied Telesis AT-S39 - Manual (Page 79)

AT-S39 User’s Guide
79
Configuring Port Security
Note
Port security can only be set through a local management session.
You cannot set this feature from a Telnet or web browser
management session, or through enhanced stacking.
To set a switch’s port security level, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 5 to select Port Security.
The Port Security menu is shown in Figure 18.
Figure 18 Port Security Menu
3. Type 1 to select Configure Port Security Mode.
The following prompt is displayed:
Enter new mode (A-Automatic, L-Limited, S-Secured, K-
locKed):
4. Select the desired security level. You can select only one security
level. For an explanation of the levels, refer to Port Security
Overview on page 77.
A change to the security level is immediately activated on the
switch.
5. Type S to select Save Configuration Changes.
6. If you selected the Limited security level, go to the next procedure to
set the MAC address limits for the individual ports.
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
Port Security
1 - Configure Port Security Mode ....... AUTOMATIC
2 - Configure Limited Mode Parameters
S - Save Configuration changes
R - Return to Previous Menu
Enter your selection?