Allied Telesis AT-S39 - Manual (Page 115)

AT-S39 User’s Guide
115
Configuring
RSTP Port
Settings
To adjust RSTP port parameters, perform the following procedure:
1. From the Spanning Tree Menu, type 4 to select RSTP Configuration.
2. From the RSTP Configuration menu, type P to select RSTP Port
Parameters. The RSTP Port Parameters menu is shown in Figure 31:
Figure 32 RSTP Port Parameters
3. Type 1 to select Configure RSTP Port Settings.
The following prompt is displayed:
Starting Port to Configure [1 to 24] ->
4. Enter the number of the port you want to configure. To configure a
range of ports, enter the first port of the range.
The following prompt is displayed:
Ending Port to Configure [1 to 24] ->
5. To configure just one port, enter the same port number here as you
entered in the previous step. To configure a range of ports, enter the
last port of the range.
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
RSTP Port Parameters
The current protocol version is RSTP.
1 - Configure RSTP Port Settings
2 - Display RSTP Port Configuration
3 - Display RSTP Port State
S - Save Configuration changes
R - Return to Previous Menu
Enter your selection?