Allied Telesis AT-S39 User Manual
Page 234
Section II: Local and Telnet Management
234
The following prompt is displayed:
Do you want confirmation before downloading each
switch -> [Yes/No]
9. Answering Yes to this prompt means that the management software
will prompt you with a confirmation message before it begins to
upgrade each switch. Answering No means the management
software will not display a confirmation prompt before downloading.
The management software begins the download.
If you are downloading a configuration file, the switch
automatically resets once the download is complete. Some
network traffic may be lost during the system reset.
Caution
When downloading a switch image file, the switch must initialize it
by decompressing it and writing it to flash. This requires one to two
minutes to complete. Do not reset or power off the unit while it is
decompressing the file.
The completion of the download and initialization process of an
AT-S39 image file is signalled with this message:
Please press
Switch Reboot...
10. Press the Return key twice to reset the switch. Some network traffic
may be lost during the system reset.
The download process is now complete. The new AT-S39 image
file or configuration file is now active on the switch.