Allied Telesis AT-S39 - Manual (Page 271)

AT-S39 User’s Guide
271
Displaying Port Status and Statistics
The procedure in this section displays the operating status of the ports
on a switch and port statistics. You can view a port’s operating speed,
duplex mode, MDI/MDI-X configuration, and more. You can also view
the operating status of any GBIC modules installed in an AT-8024GB.
To display the status or statistics of a switch port, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring page, select Layer 1.
3. Select the Port Settings tab. The tab is shown in Figure 81.
Figure 81 Port Monitoring Page
This page displays a graphical image of the front of the switch.
Ports with valid links to end nodes have a green light.
4. Click a port. You can select more than one port at a time when you
want to display port status. However, you can select only one port
when displaying statistics. A selected port turns white. (To deselect a
port, click it again.)
5. Click Status to display the port’s operating status or Statistics to
display port statistics.