Allied Telesis AT-S39 - Manual (Page 274)

Section III: Web Browser Management
274
Priority Level
The priority queue to which untagged packets are directed when
received on the port. A value of 1 to 3 directs untagged packets to
the low priority queue while a value of 4 to 7 directs packets to the
high priority queue. If the override priority feature has been
activated on the port, tagged packets will be directed to the
priority queue reflected by this status parameter. For further
information on this feature, refer to Class of Service Overview on
page 175.
If you select Statistics, the Statistics window in Figure 83 is
displayed.
Figure 83 Port Statistics Window
The information in this window is for viewing purposes only. The
statistics are defined below:
TOTAL_COUNT
Total number of packets transmitted and received on the port.
RX_COUNT
Number of packets received on the port.
RX_OVERFLOW
Number of times frames entering the port have exceeded the
capacity of the port’s buffer.
RX_UNICAST
Number of unicast received on the port.
Rx_MLTCAST
Number of multicast packets received on the port.