Allied Telesis AT-S39 - Manual (Page 226)

Section II: Local and Telnet Management
226
6. To download an AT-S39 image file or configuration using Xmodem,
do the following:
a. Type X at the prompt displayed in Step 4.
The following prompt is displayed:
You are going to invoke the Xmodem download
utility.
Do you wish to continue? [Yes/No]
b. Type Y for Yes.
The following prompt is displayed:
Use Hyper Terminal's 'Transfer/Send File' option
to select Filename & Protocol
Note: Please select '1K Xmodem' protocol for
faster download...
c. Begin the file transfer of the new management software image or
configuration file.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
Steps d. through h. illustrate the download procedure using
the Hilgraeve HyperTerminal program.
d. From the HyperTerminal main window, select the Transfer menu.
Then select Send File from the pull-down menu, as shown in
Figure 64.
Figure 64 Local Management Window