Allied Telesis AT-S39 - Manual (Page 167)

AT-S39 User’s Guide
167
Adding Static Unicast and Multicast MAC Addresses
This section contains the procedure for adding static unicast and
multicast addresses to the switch. You can assign up to 255 static MAC
addresses per port on an AT-8000 Series switch.
To add a static unicast or multicast address to the MAC address table,
perform the following procedure:
1. From the Main Menu, type 6 to select MAC Address Tables.
2. From the MAC Address Tables menu, type 2 to select Add Static MAC
Address.
The following prompt is displayed:
Please enter a MAC address ->
3. Enter the static unicast or multicast MAC address in the following
format:
XXXXXX XXXXXX
Once you have specified the MAC address, the following prompt
is displayed:
Please enter a port number: [1 to 24] ->
4. Enter the number of the port on the switch to which you want to
assign the address. If you are adding a static unicast address, you can
specify only one port. If you are adding a static multicast address, you
can specify multiple ports.
The management software adds the address to the MAC address
table.
5. Repeat steps 2 to 4 to enter additional static MAC addresses.