Allied Telesis AT-S39 - Manual (Page 63)

AT-S39 User’s Guide
63
Selecting a Switch in an Enhanced Stack
The first thing you should do before performing a procedure on a switch
in an enhanced stack is check to be sure you are performing it on the
correct switch. If you assigned system names to your switches, then this
is easy. The name of the switch being managed is always displayed at
the top of every management menu.
When you start a management session on the Master switch of an
enhanced stack, you are by default addressing that particular switch. The
management tasks that you perform affect only the master switch.
To manage a slave switch or another Master switch in the stack, you
need to select it from the management software.
To select a switch to manage in an enhanced stack, perform the
following procedure:
1. From the Main Menu, type 9 to select Enhanced Stacking.
2. From the Enhanced Stacking menu, type 2 to select Stacking Services.
The Stacking Services menu is shown in Figure 11.
Figure 11 Stacking Services Menu
Allied Telesyn Ethernet Switch AT-8024GB - AT-S39
Sales Switch
Login Privilege: Manager
Stacking Services
Switch Software Switch
Num MAC Address Name Mode Version Model
-------------------------------------------------------------
G - Get/Refresh List of Switches
S - Sort Switches in New Order
A - Access Switch
I - Image Download to Remote Switches
C - Configuration Download to Remote Switches
B - Boot Loader Download to Remote Switches
R - Return to Previous Menu
Enter your selection?