Allied Telesis AT-S39 - Manual (Page 237)

AT-S39 User’s Guide
237
Steps d. through h. illustrate how you would upload a file
using the Hilgraeve HyperTerminal program.
d. From the HyperTerminal main window, select the Transfer menu.
Then select Receive File from the pull-down menu, as shown in
Figure 67.
Figure 67 Local Management Window
The Receive File window is shown in Figure 68.
Figure 68 Receive File Window
e. Click the Browse button and specify the location on your
computer where you want the system file stored.
f. Click on the Use Receiving Protocol field and select as the
transfer protocol either Xmodem or, for a faster download, 1K
XModem.