Allied Telesis AT-S39 - Manual (Page 308)

Section III: Web Browser Management
308
Viewing the MAC Address Table
To view the MAC address table, perform the following procedure:
1. From the Home page, select either Configuration or Monitoring.
2. Select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address menu is displayed. Figure 97 shows how this
menu appears when you display it through the Configuration
main menu selection. If displayed through the Monitoring main
menu selection, the Add button is not included. This button is
used to add static unicast and multicast address to the switch. For
instructions, refer Adding Static Unicast and Multicast MAC
Addresses on page 311.)
Figure 97 Forwarding Database Tab
4. Select an option to display MAC addresses. The options are described
below.
View All MAC Addresses
This option displays both static and dynamic MAC addresses.
View All Dynamic Addresses
This option displays only dynamic MAC address. Dynamic MAC
addresses are addresses that the switch has learned by examining
the source addresses of frames received on the ports.