Allied Telesis AT-S39 - Manual (Page 41)

AT-S39 User’s Guide
41
Configuring an IP Address and Switch Name
The procedure in this section explains how to manually assign an IP
address, subnet mask, and gateway address to the switch from a local or
Telnet management session. (If you want the switch to obtain its IP
configuration from a DHCP or BOOTP server on your network, go to the
procedure Activating the BOOTP and DHCP Client Software on page
44.)
This procedure also explains how to assign a name to the switch, along
with other optional information, such as the name of the administrator
responsible for maintaining the unit and the location of the switch.
To manually set a switch’s IP address, perform the following procedure:
1. From the Main Menu, type 4 to select Administration Menu.
The Administration Menu is shown in Figure 3.
Figure 3 Administration Menu
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
Administration Menu
1 - IP Address ........ 0.0.0.0
2 - Subnet Mask ....... 0.0.0.0
3 - Default Gateway ... 0.0.0.0
4 - System Name ....... Sales Switch
5 - Administrator ..... Jane Smith
6 - Comments .......... Bldg. 12, Rm. 201
7 - Set Password ......
8 - BOOTP/DHCP ........ Disabled
9 - Reset Switch
A - Server-based Authentication
D - Downloads & Uploads
P - Ping a Remote System
R - Return to Previous Menu
Enter your selection?