Allied Telesis AT-S39 - Manual (Page 135)

AT-S39 User’s Guide
135
Creating a New Port-based or Tagged VLAN
To create a new port-based or tagged VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
The VLAN Menu is shown in Figure 37.
Figure 37 VLAN Menu
2. From the VLAN Menu, type 5 to select Configure VLANs.
The Configure VLANs menu is shown in Figure 38.
Figure 38 Configure VLANs Menu
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
VLAN Menu
1 - VLANs Status ................Enabled
2 - Ingress Filtering Status ....Enabled
3 - VLANs Mode ..................User Configured
4 - Management VLAN .............1 (Default_VLAN)
5 - Configure VLANs
6 - Configure COS Priorities
7 - Show VLANs
8 - Show PVIDs & Priorities
S - Save Configuration changes
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
Configure VLANs
1 - Create VLAN
2 - Modify VLAN
3 - Delete VLAN
4 - Clear All Vlans
S - Save Configuration changes
R - Return to Previous Menu
Enter your selection?