Allied Telesis AT-S39 - Manual (Page 214)

Section II: Local and Telnet Management
214
Viewing Port Access Status
Note
You must use a local management session to view port-based
access control parameters. You cannot view the parameters
through a Telnet management session or enhanced stacking.
To view port access status, perform the following procedure:
1. From the main menu, type 1 to select the Port menu.
2. In the Port menu, type 6 to select the Port Access Control menu.
3. From the Port Access Control Menu, type 5 to select Display Port
Access Status. The Port Access Status is displayed (see Figure 60).
Figure 60 Display Port Access Status Menu
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
Display Port Access Status
Port PortRole Status Supplicant
-------------------------------------------------------
001 None ------ -----------------
002 Authenticator ------ -----------------
003 Authenticator ------ -----------------
004 Authenticator ------ -----------------
005 None ------ -----------------
006 None ------ -----------------
007 None ------ -----------------
008 None ------ -----------------
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?