Allied Telesis AT-S39 - Manual (Page 315)

AT-S39 User’s Guide
315
Configuring CoS
To configure CoS, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the CoS tab.
The CoS tab is shown in Figure 99.
Figure 99 CoS Tab
4. Click the port where you want to configure CoS. You can select only
one port at a time. A selected port turns white. (To deselect a port,
click it again.)
5. Click Modify.