Allied Telesis AT-S39 User Manual
Page 213
AT-S39 User’s Guide
213
❑ Force-unauthorized: Causes the port to remain in the
unauthorized state, ignoring all attempts by the client to
authenticate. The switch cannot provide authentication services
to the client through the interface
2 - Quiet Period
Sets the number of seconds that the switch remains in the quiet
state following a failed authentication exchange with the clien
t.
The default value is 60 seconds. The range is 0 to 65,535 seconds.
3 - Tx Period
Sets the number of seconds that the switch waits for a response to
an EAP-request/identity frame from the client before
retransmitting the request. The default value is 30 seconds. The
range is 1 to 65,535 seconds.
4 - Reauth Period
Enables periodic reauthentication of the client, which is disabled
by default. The default value is 3600 seconds. The range is 1 to
65,535 seconds.
5 - Supplicant Timeout
Sets the switch-to-client retransmission time for the EAP-request
frame. The default value for this parameter is 30 seconds. The
range is 1 to 600 seconds.
6 - Server Timeout
This is the timer used by the switch to determine authentication
server timeout conditions. The default value for this parameter is
30 seconds. The range is 1 to 65,535 seconds.
7 - Max Requests
This parameter specifies the maximum number of times that the
switch retransmits an EAP Request packet to the client before it
times out the authentication session. The default value for this
parameter is 2 retransmissions. The range is 1 to 10
retransmissions.
8. Type S to select Save Configuration Changes.