Allied Telesis AT-S39 - Manual (Page 266)

Section III: Web Browser Management
266
Configuring Port Parameters
To configure the parameter settings for a port on a switch, perform the
following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Setting tab.
The Port Setting tab is shown in Figure 79.
Figure 79 Port Setting Configuration Tab
4. Click the port in the graphical switch image that you want to
configure. The selected port turns white. You can select more than
one port at a time to configure. (To deselect a port, click it again.)
5. Click Modify.