Allied Telesis AT-S39 - Manual (Page 164)

Section II: Local and Telnet Management
164
Displaying MAC Addresses
The management software has two menu selections for displaying the
MAC addresses of a switch. One selection displays the static and
dynamic MAC addresses while the other displays just the static
addresses.
To display the MAC address table, perform the following procedure:
1. From the Main Menu, type 6 to select MAC Address Tables.
The MAC Address Table menu is shown in Figure 45.
Figure 45 MAC Address Table Menu
2. Select one of the following:
❑ To display all static and dynamic MAC addresses for all ports, type
1 to select Show All MAC Addresses
❑ To display only static MAC addresses, type 5 to select Show All
Static MAC Addresses.
❑ To display static and dynamic addresses for only the base ports
(excludes GBIC ports and ports on expansion modules), type A to
select View MAC Addresses on Base Ports.
Allied Telesyn Ethernet Switch AT-8024 - AT-S39
Sales Switch
Login Privilege: Manager
MAC Address Tables
1 - Show all MAC Addresses
2 - Add static MAC Address
3 - Delete MAC Address
4 - Delete all dynamic MAC Addresses
5 - Show all static MAC addresses
6 - View MAC addresses by Port
7 - View the port of MAC address
8 - View MAC addresses by VLAN ID
9 - View IP Multicast MAC Addresses
A - View MAC addresses on base ports
R - Return to Previous Menu
Enter your selection?