Allied Telesis AT-S39 - Manual (Page 272)

Section III: Web Browser Management
272
If you select port status, the Port Status window in Figure 82 is
displayed.
Figure 82 Port Status Window
The information in this window is for viewing purposes only. To
adjust port parameters, refer to Configuring Port Parameters on
page 266.
The columns in the window are described below:
Port
The port number.
Port Name/Description
Port’s name or description.
Link
The status of the link between the port and the end node
connected to the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
Neg
The status of Auto-Negotiation on the port. Possible values are:
Auto - Indicates that the port is using Auto-Negotiation to set
operating speed and duplex mode.
Manual - Indicates that the operating speed and duplex mode are
set manually.
MDIO
The operating configuration of the port. Possible values are Auto,
MDI and MDI-X.