Allied Telesis AT-S39 - Manual (Page 282)

Section III: Web Browser Management
282
Creating or Deleting a Port Mirror
To create or delete a port mirror, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Mirroring tab.
The management software displays the Port Mirroring menu in
Figure 86.
Figure 86 Port Mirroring Menu
To create a port mirror, go to step 4. To delete a port mirror, go to
step 5.
4. To create a port mirror, do the following:
a. Use the pull-down menu from Mirroring Port to select the port to
function as the port mirror. This is the port will the traffic from the
source ports will be copied to. You can select only one mirroring
port.
b. Click the port(s) in the graphical switch image whose traffic is to
be copied to the mirror port. These are the source ports.
c. Click Apply.