HP NonStop G-Series - Manual (Page 395)

Monitoring Hardware Components
Guardian User’s Guide — 425266-001
19 -17
Checking ServerNet LAN Subsystem Status
•
Adapters
•
ServerNet Addressable Controllers (SACs)
•
Logical Interfaces (LIFs)
•
Filters
•
Physical Interfaces (PIFs)
The following commands describe how to obtain the status of SACs, adapters, LIFs, and
PIFs. For more information on the ServerNet LAN subsystem, see the LAN
Configuration and Management Manual.
•
To check the status of a SAC, enter:
> SCF STATUS SAC sac-name
A listing similar to this is sent to your home terminal:
•
To check the status of an adapter, enter:
> SCF STATUS ADAPTER adapter-name
A listing similar to this is sent to your home terminal:
•
To check the status of a LIF, enter:
> SCF STATUS LIF lif-name
A listing similar to this is sent to your home terminal:
•
To check the status of a PIF, enter:
> SCF STATUS PIF pif-name
->STATUS SAC $ZZLAN.E4SA1.O
SLSA Status SAC
Name Owner State
$ZZLAN.E4SA1.0 1 STARTED
->STATUS ADAPTER $ZZLAN.E4SA1
SLSA Status ADAPTER
Name State
$ZZLAN.E4SA1 STARTED
->STATUS LIF $ZZLAN.LAN0
SLSA Status LIF
Name State Access State
$ZZLAN.LAN0 STARTED UP