HP NonStop G-Series - Manual (Page 201)

Using Labeled Tapes
Guardian User’s Guide — 425266-001
10 -27
Setting Whether Tapes Are Unloaded After Labeling
Examples
This MEDIACOM example shows that the NOUNLOAD state is on (the default value).
After the UNLOAD OFF command is entered, the default value changes from on to off.
MC> ENV
MC> UNLOAD OFF
MC> ENV
Tapes remain online after each labeling command until you enter another UNLOAD
command or exit the session.
Guidelines
•
UNLOAD ON is the default value when MEDIACOM is started.
•
The UNLOAD OFF condition applies to the following commands: ADD
TAPELABEL command and its options LABELS IBM, NEWNAME, and
SCRATCH, and the INFO TAPELABELS command.
•
The UNLOAD ON command affects only the current MEDIACOM process and is
active until you change it with the UNLOAD command, OFF option.
Tape Drive NO SESSION DEFAULT SET
File Catalog \SKY.FILE_CATALOG_SKY
Volume Catalog \SKY.MASTER_TAPE_CATALOG
Pool TAPES_FOR_SKY
Volume \SKY.$OPRVOL.OPR
Unload ON
Tape Drive NO SESSION DEFAULT SET
File Catalog \SKY.FILE_CATALOG_SKY
Volume Catalog \SKY.MASTER_TAPE_CATALOG
Pool TAPES_FOR_SKY
Volume \SKY.$OPRVOL.OPR
Unload OFF