beautypg.com

Automatic measurements, Measurement types – GW Instek GDS-200 Series User Manual User Manual

Page 86

background image

GDS-200 & GDS-300 Series User Manual

86

Automatic Measurements

Up to 4 automatic measurements can be calculated from the trigger
configuration conditions each time a waveform is captured.
The automatic measurements can be based on the entire record
length, the area of the waveform displayed on-screen or from a
gated region bound by the onscreen cursors.

Measurement Types

Amplitude Measurements

Pk-Pk

Difference between positive and
negative peak. (=max − min)

Max

Positive peak.

Min

Negative peak.

Amplitude

Difference between the global high
value and the global low value,
measured over the entire waveform
or gated region. (=high − low)

High

Global high voltage.

Low

Global low voltage.

Mean

The arithmetic mean value is
calculated for all data samples as
specified by the Gating option.

Cycle Mean

The arithmetic mean value is
calculated for all data samples
within the first cycle found in the
gated region.

RMS

The root mean square of all data
samples specified by the Gating
option.

This manual is related to the following products: