beautypg.com

Setting the system date & time – GW Instek GDS-200 Series User Manual User Manual

Page 33

background image

GETTING STARTED

33

Setting the System Date & Time

Background

The GDS-200/300 will keep the date and time
settings saved so long as the battery is not
allowed to fully discharge.

1. Access the Menu tray by tapping the title bar.

2. Press Utility>System>Date&Time.

The Date&Time menu will appear.

3. To set the date, press Date and use the number

picker to set the year, month and day.

4. To set the time, press Time and use the number

picker to set the hour and minute.

5. Press OK to save the date and time settings.

Note

The date and time settings only remain saved if
the battery is not fully drained. However, if the unit
shuts down due to insufficient battery power, there
will usually still be enough battery power to keep
the internal clock running for sometime.

This manual is related to the following products: