GW Instek GDS-200 Series User Manual - Manual (Page 144)

GDS-200 & GDS-300 Series User Manual
144
Second Method:
Vertical Orientation: Press and hold the DMM area for a short while to
directly bring up the multimeter settings.
Hold DMM
area
Multimeter settings
Horizontal Orientation: Press the Measure button to reveal the DMM
area*. Press and hold the DMM area for a few seconds to bring up the
multimeter settings.
*The DMM area can be expanded/collapsed by pressing once on the
DMM area.
Press the
Measure
button
Press and hold
DMM area
Multimeter settings